Home > Speaker Repair & Refoam Kits >

10 inch Speaker Repair Kit Angle Attach with 1 RUBBER Surround - SWK10ARB

10" Rubber Speaker Repair Kit Angle

Click here if you don't know which speaker repair kit you need




 
Alternative Views:


Note: a repair kit will repair one speaker; for a pair of speakers, order two repair kits and receive a quantity discount!
Our Price: $14.95
Sale Price: $9.95
You save $5.00!


Stock Status:In Stock
Availability: Usually Ships in 1 to 2 Business Days
Product Code: SWK10ARB


Adhesive:
No Adhesive (Best for International Shipments) [Subtract -$0.99]
Standard LATEX Surround Adhesive (DO NOT FREEZE)
Nitrile Rubber Adhesive (OK to Ship to Freezing Areas) [Add $0.99]

 

  
Description
 
Kit to repair one 10 inch speaker. Comes with 1 nitrile rubber surround, instructions, speaker adhesive, applicator brush, and phone or email technical support. Fits a speaker cone of 7-3/4 inches. Works on angle attach speaker cones. Works for many 10" speakers with rubber surrounds.

High quality NBR (Nitrile Butadiene Rubber) surround.

Works for 10" woofers with rubber surrounds including: Audiovector, Klipsch, JBL, Tannoy and many more.

Surround Outside Diameter: 9-7/8" ( 25 cm )
Speaker Cone Outside Diameter: 7-3/4" ( 19.7 cm )
Surround Inside Diameter: 7-1/4" ( 18.5 cm )
Surround Roll Outside Diameter: 8-7/8" ( 22.5 cm )
Surround Roll Width: 9/16" ( 1.5 cm)
Surround Roll Height: 9/32" ( .7 cm)

We offer quantity discounts on purchases of more then one speaker repair kit which will be automatically calculated in the shopping cart. Note that we will only send one set of instructions per order. We will usually combine the adhesive into fewer large containers for quantity orders.

Accessories & Related Products...
10 Inch Black EVA Foam Speaker Gasket 4 Piece - GASKET10C
Sale Price: $1.99

Add
10 Inch Foam Speaker Gasket

Average Customer Review: 5 of 5 Total Reviews: 15 Write a review.

  0 of 0 people found the following review helpful:
 
Great product January 8, 2019
Reviewer: JOSHUA KLIPSTEIN from GONZALES, LA United States  
Super easy install. Repaired a JBL surround sub. Prefer a faster glue dry time but it isn't bad, patience is key here anyways. Used various tin lids as a hold down while drying, that worked well. Final looks good and sounds good.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
AWESOME & AFFORDABLE PRODUCT November 5, 2018
Reviewer: staaypuft from Los Angeles, CA  
Easy to follow instructions and at an inexpensive price. Brought life back to my 20 year old subwoofer with an easy fix.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Carver AL-III Subwoofers May 7, 2018
Reviewer: CCJJLL from Dearborn, MI United States  
The installation went very well and the instructions provided are very thorough. The surround material is of a good quality product. I expect to get many good years more of listening pleasure from these subwoofers. Back in 2010 I purchased the same 10" surrounds for an Entec (3-10") subwoofer. That installation also went very well. Thank you for making these products!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Utah Imperials 10" woofers 2ea. April 29, 2017
Reviewer: WILLIAM KIRSTEIN from DEXTER, MI United States  
Re did surrounds both woofers...Also just did 2 Marantz SP1250 woofers with one of your kits...Was fairly easy to do...Did a pair of Marantz HD880 few years ago too...not sure how to send pictures...Bill...

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
First Time Replacing Surround January 31, 2017
Reviewer: David from Buffalo Grove, IL United States  
I was ready to toss this speaker out until I heard this type of repair was even possible.  Although very tedious and somewhat time consuming, it turned out great.  Here's a few tips I found which were not part of the written instructions with the surround and slightly different than what I saw on video.  The adhesive for the rubber surround seems like a type of  rubber contact cement, not the vinly acetate type of white adhesive.  There was no need to use the applicator stick supplied to smooth it out after applying a small bead.  This adheisve skins over within 3-4 minutes and if you try to smooth it out, it just gets clumped up and not uniform.  It's better to not smooth it out.  When bonding the surround to the paper cone, it helps to support the back side of the cone with your finger as you continue pressing on the top of the surround.  Do this around the edge for about 5-10 minutes as the adhesive gets more tacky and eventually it will stick.

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Speaker Repair & Refoam Kits
Speaker Parts
Speaker Repair & Refoam Kits > Klipsch