Home > Speaker Parts > Woofers, Mids, & Tweeters > Woofers > 8 ohm >

4" High-End Shielded Woofer 8 Ohm - AAW418

4" High-End Shielded Woofer

Alternative Views:

List Price: $59.95
Our Price: $35.95
You save $24.00!

Stock Status: See Availability Below

Availability: Usually Ships Out Within 7 Days
Product Code: AAW418


4" High-End Shielded Woofer 8 Ohm - AAW418

Polypropylene cone with perfect balance of stiffness, mass, and self-damping
High loss rubber surround offers high excursion and long term durability
High power handling voice coil
Damping dust cap
Rigid aluminum die-cast frame
Symmetric Motor Drive (SMD) technology.
Designed and engineered in the USA

The AAW418 offers natural and detailed sound performance with very low distortion. The design of this driver is based upon the benefit of an extended pole piece in a magnet system. Finite element analysis (FEA) simulation was used to optimize the magnet structure and specifically to shape the pole piece to achieve symmetric flux distribution along travel path of the voice coil. This design provides better driving force linearity and it also considerably reduces VC inductance modulation and DC offset of the moving system at high power levels. The result is much less distortion and more effective VC cooling. The aluminum die-cast frame has been developed to minimize parasitic structural resonances and dissipate VC heat rapidly.

This woofer is a perfect match for the AAT2BH8 Tweeter in a 2-way speaker cabinet.

86dB 1W/1M * 8 ohm * 70W/Max * 35W/RMS * 9 oz Magnet * Diameter 4-3/4" (4-1/8") * Cutout 3-7/8" * Mounting Depth 2-7/8"

=praxis= Thiele/Small Parameters: broken-in driver

Qts = 0.309 Total Q
Qes = 0.370 Electrical Q
Qms = 1.894 Mechanical Q
Fs = 54.581 Hertz, Free Air Resonance
Re = 7.04 Ohms, DC resistance
Ls = 338.5u H, series inductance
Lp = 358.3u H, lossy series inductance
Rp = 2.738 Ohms, loss across Lp
Dia = 82m meters, effective
(%shift) 46.6 %, resonance with mass
Vas = 5.639 litres, air volume equivalent
mms = 5.906 grams, effective mass
cms = 1.439m m/N, compliance
bl = 6.209 T*m, motor strength
n0 = 238.3m %, max efficiency
SplSens = 85.77 dBSPL max @1W absorbed
(Added mass) 15 grams


Dimensions in Millimeters:

Accessories & Related Products...
Abaca Audio 1" High-End Dome Tweeter 8 Ohm - AAT2BH8
Our Price: $19.95

1" Dome Tweeter High-End

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
5 of 5 Speaker good, service meh.. October 1, 2020
Reviewer: Darrell Haemer from Erie, PA United States  
The quality of the speaker seems excellent, and when I tested it I thought it sounded quite good.

Unfortunately, the amount I paid for shipping was unrealistic, and then it was delayed in shipping. If I pay that much for shipping, I expect the packing quality and shipping service to be high quality.

Was this review helpful to you?

Browse for more products in the same category as this item:

Speaker Parts > Woofers, Mids, & Tweeters > Woofers > 8 ohm
Speaker Parts > Woofers, Mids, & Tweeters > Woofers
Speaker Parts > Woofers, Mids, & Tweeters > Woofers > 4" and Smaller
Speaker Parts > Woofers, Mids, & Tweeters
Speaker Parts > Woofers, Mids, & Tweeters > Woofers > High-End Woofers
Speaker Parts > Woofers, Mids, & Tweeters > High-End Drivers