Home > Speaker Parts > Speaker Grills > Custom Speaker Grills >

Fasteners For Custom Speaker Grills - FAS2
Fasteners For Custom Speaker Grills - FAS2
 
Our Price: $5.00


Availability: Usually Ships Out Within 7 Days
Product Code: FAS2
Qty:

Description
 
Angled metal and screws for attaching our custom speaker grills. Use one set of four fasteners per grill. More fasteners can be used for larger grills.

To install with the fasteners hold the grill in place where it will be installed and mark spots (with a pencil) on each of the four sides where the fastener will go. Remove the grill and install the angled pieces just inside marks that you made. Use suitable screws for the type of surface that you are mounting the grills to. The screws we supply (6 x 1/2 metal screws) should work for many surfaces but you may want to use other types as drywall anchors or wood screws. Once the fasteners are installed on the surface the grills should press fit onto them. This press fit may alone be secure for some installations but to make the grill more secure you will want to install screws through the sides of the grill and into the angle. Use a 7/64” drill bit to drill through one of the grill holes and through the metal angle pieces (if needed). The supplied screws can then be installed through these holes.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 4 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 August 16, 2024
Reviewer: David Severini from FOSTER CITY, CA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 August 16, 2024
Reviewer: Christopher Reckley from Indianapolis, IN United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Speaker grill fasteners January 29, 2020
Reviewer: Al from West Vancouver, BC Canada  
I'm happy with these and they work as advertised.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 mounting March 24, 2014
Reviewer: James Duncan from Mansfield, TX United States  
As it turns out, I only needed one mount per speaker for the top as I used magnets to hold the sides and bottom to my fabricated metal speaker boxes.
The idea came from your customer service guy!  Thanks for all of the service and information! J. B.

Was this review helpful to you?


Browse for more products in the same category as this item:

Speaker Parts > Speaker Grills > Custom Speaker Grills


Speaker Dust Cap Paper 3" $2.50